Jaguar F-Pace Forum banner

Clock accuracy

5K views 9 replies 8 participants last post by  Rosco2612 
#1 ·
The clock in my f pace appears to lose time ie run slow.
Is there any way to adjust it rather than resetting the time every now and again?
 
#2 ·
Hi Irishabroad
Funnily enough I reset the clock on mine yesterday as it was slow by 2 minutes.
I last reset it around 6 months ago.
I'd be surprised if clock speed is adjustable but who knows?
 
#5 ·
Time means nothing to a jaguar driver, we arrive when it suits us not when Greenwich dictates :D
 
  • Like
Reactions: LearnerDriver
#6 ·
Solution is very simple:
- Find a long, straight, empty piece of road
- Accelerate in your Jaguar until you achieve the speed of light
- At this point, your clock will begin go backwards
- Decelerate once the correct time is showing on your clock
Oh wait - your clock is slow not fast. in that case, I have no idea - sos.

:mrgreen:
 
  • Like
Reactions: LearnerDriver
#7 ·
Matteus F-Pace said:
Solution is very simple:
- Find a long, straight, empty piece of road
- Accelerate in your Jaguar until you achieve the speed of light
- At this point, your clock will begin go backwards
- Decelerate once the correct time is showing on your clock
Oh wait - your clock is slow not fast. in that case, I have no idea - sos.

:mrgreen:
Not knowing his engine size, it is possible that he could achieve exit velocity in the F Pace and reach a low orbit, but perhaps not with a 2.0l diesel..

Downhill, with a following wind (which is probably the odour of adBlue.....) etc
 
#9 ·
The clock in my f pace appears to lose time ie run slow.
Is there any way to adjust it rather than resetting the time every now and again?
Mine does exactly the same ( 2018 RSport) and loses about 2 minutes every few weeks. I am retired so its rarely an issue but as a businessman charging between meeting on a regular basis it would have frustrated me as I used to set my clock a few minutes fast in any case!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top